6
plug into
wall outlet
camera setup (wall mount option):
1/4”
Pre-drill a hole in the
wall using 3/16", 4.8mm,
drill bit. (drill bit and
drill not included)
Tighten screw until only 1/4"
(6.2mm) of the screw is
exposed.
(screwdriver not included)
3
4
65
2
1
Determine a location to mount
the camera to the wall that will
provide the best view of your
baby in the crib. NEVER place
camera or cords within 3 feet of
the crib.
STRANGULATION HAZARD - Children have
STRANGLED in cords. Keep this cord out of
reach of children (more than 3 feet (0.9 m)
away from the crib). Use enclosed Security
Clips to help secure cord away from baby’s
reach. Never use extension cords with AC
Adapters. Only use the AC Adapters provided.
WARNING:
plug in to
AC adapter jack
at
least
3ft.
Secure the cord to the wall
using the 6 security clips
included to keep cord away
from baby's reach.
IMPORTANT
Be sure to test reception
and camera positioning.
turn on
IMPORTANT
To Next Page
Loading...
