EasyManua.ls Logo

Summit Professional VC28S - User Manual

Summit Professional VC28S
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WINE CELLARS
Models:
VC28S
VC60D
SWC007
ASDW1522
LAWC1543
ADWC1552
SDW1527
LWC1547
SDWC1556
ASDW2412
LAWC2431
ADWC2442
SDW2416
LWC2435
SDWC2446
ALWC15
SWC1535B
SWC1102
SWC1875B
SWC1926
SWC1966
User Manual
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Ave
Bronx, New York 10474
www.summitappliance.com
Write Serial Nos. (on lower left corner of
inside cabinet) here:

Questions and Answers

  • T
    Tyler McfarlandSep 10, 2025
    What does “--” mean on my Summit Professional VC28S temperature display?
    • S
      Steve BlankenshipSep 12, 2025
      The “--” icon flashing on the temperature display of your Summit Professional Wine Cooler indicates that the displayed temperature is out of range. Only temperatures between 0~99°F/-9~37°C can be shown. This is normal when the temperature falls outside this range.
  • S
    Steven MarksSep 9, 2025
    Why my Summit Professional VC28S does not operate?
    • K
      Krista GrantSep 9, 2025
      Your Summit Professional Wine Cooler may not be operating because it is not connected to a power supply, it is turned off, or a circuit breaker has tripped or a fuse has blown. Connect the appliance, switch it on, or switch on the circuit breaker or replace the fuse.
  • J
    James RoweSep 8, 2025
    What to do if my Summit Professional VC28S light does not work?
    • P
      Phillip CraigSep 8, 2025
      If the light in your Summit Professional Wine Cooler isn't working, check if the appliance is connected to a power supply, and ensure that the circuit breaker hasn't tripped or a fuse blown. Also, verify that the light hasn't been switched off on the control panel. Connect the appliance, switch on the circuit breaker or replace the fuse, or switch on the light.
  • K
    Kenneth HamiltonAug 22, 2025
    Why is my Summit Professional Wine Cooler not cold enough?
    • F
      Felicia LopezAug 23, 2025
      If your Summit Professional Wine Cooler is not cold enough, consider the following: * Verify that the temperature is set correctly. * The ambient temperature might require a lower setting, so try setting a lower temperature. * Avoid opening the door too often. * Ensure the door is completely closed and properly sealed; clean or replace the door seal if necessary. * Clean the condenser when needed. * Make sure the ventilation opening is clear and free of dust.
  • M
    miguelliSep 5, 2025
    How to fix vibrations in my Summit Professional Wine Cooler?
    • H
      Haley JacksonSep 5, 2025
      If your Summit Professional Wine Cooler is vibrating, it might not be properly leveled. Correct this by adjusting the feet until the appliance is stable.
  • A
    antoniodavisSep 4, 2025
    What to do if my Summit Professional Wine Cooler alarm sounds and the temperature display flashes?
    • B
      Brianna AndersonSep 4, 2025
      If the alarm sounds and the temperature display flashes on your Summit Professional Wine Cooler, first check if the door has been open for longer than 60 seconds and close it. If not, the temperature may have risen or fallen beyond the set temperature due to: * The door being opened too often. * The ventilation opening being covered or dusty. * A power interruption. * Too many bottles inside. Address these issues by limiting door openings, clearing ventilation obstructions, and allowing the unit time to stabilize after a power interruption or after adding a large number of bottles.
  • K
    karen48Sep 3, 2025
    What to do if my Summit Professional VC28S is making too much noise?
    • M
      Michael PageSep 3, 2025
      Some noise from your Summit Professional Wine Cooler is normal. Rattling might be the refrigerant flowing, and gurgling can occur as each cycle ends. Temperature fluctuations can cause popping and cracking sounds due to the contraction and expansion of the inner walls. However, excessive noise could also indicate that the appliance isn't properly level. In that case, level the appliance with the adjustable feet.
  • A
    angela04Sep 2, 2025
    What does it mean when the icon “--” is lit up and flashing on my Summit Professional VC28S?
    • C
      Chelsea HallSep 2, 2025
      The “--” icon flashing on the temperature display of your Summit Professional Wine Cooler indicates that the display temperature is out of the range of 0~99°F/-9~37°C. This is normal when the temperature falls outside of this range.
  • C
    Cynthia FisherSep 1, 2025
    How to stop vibrations in my Summit Professional VC28S Wine Cooler?
    • K
      Katherine FisherSep 1, 2025
      If your Summit Professional Wine Cooler is vibrating, make sure the appliance is properly leveled with the adjustable feet.
  • L
    Linda GloverAug 31, 2025
    Why is my Summit Professional VC28S Wine Cooler making so much noise?
    • W
      Wayne HopkinsAug 31, 2025
      If your Summit Professional Wine Cooler is making too much noise, keep in mind: * The rattling noise might be due to the flow of refrigerant, which is normal. * Gurgling sounds can occur as each cycle ends, also due to refrigerant flow. * Popping and crackling noises may result from the contraction and expansion of the inner walls due to temperature fluctuations. * Ensure the appliance is level by adjusting the feet.

Summit Professional VC28S Specifications

General IconGeneral
ModelVC28S
TypeWine Cooler
Capacity28 bottles
ShelvesWooden
Temperature ZonesSingle Zone
BrandSummit
Temperature Range41 to 64°F (5 to 18°C)
FinishStainless Steel
InstallationFreestanding
DoorGlass
Voltage115V

Related product manuals