2 Summit 3000 Installation Manual
1.2 Safety
Safety Signal Definitions:
Indicates an imminently hazardous situation that, if not avoided, will result in death
or serious injury.
Indicates a potentially hazardous situation that, if not avoided, could result in
serious injury or death, and includes hazards that are exposed when guards are
removed.
Indicates a potentially hazardous situation that, if not avoided, may result in minor
or moderate injury.
Indicates information about procedures that, if not observed, could result in
damage to equipment or corruption to and loss of data.
General Safety
Do not operate or work on this equipment unless you have read and understand
instructions in the manual. Failure to follow the instructions or heed the warnings could
result in injury or death. Contact any Rice Lake Weighing Systems dealer for replacement
manuals. Proper care is your responsibility.
Failure to heed may result in serious injury or death.
Do not allow minors (children) or inexperienced persons to operate this unit.
Do not operate without all shields and guards in place.
Do not jump on the scale.
Do not use for purposes other then weight taking.
Do not place fingers into slots or possible pinch points.
Do not use any load bearing component that is worn beyond 5 percent of the original dimension.
Do not use this product if any of the components are cracked.
Do not exceed the rated load limit of the unit.
Do not make alterations or modifications to the unit.
Do not remove or obscure warning labels.
Keep hands, feet and loose clothing away from moving parts.
To Next Page
Loading...