Page 8
STEP #5
Electrical Connection
Before proceeding further, verify that the power supply is disconnected. Verify
that the appropriate electrical supply requirements have been met. Please refer
to the table on page 4 for appropriate electrical requirements. The cook top is
supplied with a 48-inch long conduit for a connection to an accessible junction
box. The conduit consists of three insulated wires. There is a hot lead conductor
(black insulated-tinned copper), one insulated ground conductor (green
insulated-tinned copper) and a neutral conductor (white insulated-tinned copper).
Attach conductor wires to residence wiring in accordance with national, state and
local electric codes.
Warning – Grounding
The entire appliance must be grounded at all times
when the electrical power supply is on. Do not
ground the appliance with the neutral house supply
wire (white). A separate ground must be used.
STEP #6
Final Preparations Prior to Use
Remove the plastic film from the cook top. Clean the cook top before you use it
for the first time. A thorough cleaning with a recommended cook top cleaner
(Cerama Brite Ceramic Cook Top Cleaner) will provide a clean, shiny coating on
the cook top surface.
The next section of the manual covers cook top use, maintenance, safety and
service information.
Please keep these instructions with your cook top for future reference.
!
To Next Page
Loading...
