EasyManua.ls Logo

Summit PRO24G - Cleaning the Oven Door

Summit PRO24G
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning the oven door
Don't use harsh abrasive cleaners or
sharp metal scrapers for cleaning the
oven door. They could scratch the
surface and damage the glass.
Removing the oven door
1. Open the oven door.
2. Open the clips at the hinge housing
on the right and left sides of the door
by pressing them down as illustrated
in the figure.
1 Door
2 Hinge
3 Oven
1 Frame
2 Plastic part
2. Pull towards yourself and remove the
plastic part installed on the upper
section of the door.
1 Innermost glass panel
2 Middle glass panel
3 Outer glass panel
4 Plastic glass panel slot -
lower
3. As illustrated in the figure below,
raise the innermost glass panel (1)
slightly in direction A and pull it out in
direction B.
Repeat this procedure to remove the
middle glass panel (2).
3. Move the door to the half-way
position.
4. Remove the door by pulling it upward
to release it from the right and left
hinges.
Removing the inner glass panels
from the oven door
The inner glass panels of the oven door
can be removed for cleaning.
1. Open the oven door.
30

Related product manuals