Need help?Do you have a question about the Sun Gold Power SG48100P and is the answer not in the manual?
Diagram showing the physical layout of ports and indicators on the battery panel.
Detailed explanation of each component and port on the battery module panel.
Details basic configurable parameters for the BMS, like overcharge and discharge limits.
Visual representation of different interface connectors like CAN, RS485, and RS232.
Detailed pinout and function definitions for RS232, RS485, CAN, and parallel communication ports.
Explains how the BMS communicates via RS232, including baud rate and monitored data.
Details RS485 communication, baud rate, and address setting for monitoring devices.
Briefly describes CAN communication and its baud rate.
Describes standard charging current, voltage, and provides a charging curve.
Presents discharge curves at different magnifications to illustrate performance.
Explains the meaning of different LED status indicators on the battery system.
Details the audible alerts provided by the buzzer for various conditions.
Explains the function of the physical buttons for activation, sleep, and reset.
Lists the conditions under which the system enters a low-power or hibernate mode.
Describes the conditions and methods for waking the system from low-power mode.
Provides guidelines for storing the battery pack, including environmental and state of charge requirements.
Outlines precautions and methods for safely transporting the battery pack.
General| Model | SG48100P |
|---|---|
| Frequency | 50/60 Hz |
| Protection Features | Overload, Overvoltage, Short Circuit, Over Temperature |
| Operating Temperature | -25°C to +60°C |
| Rated Power | 4800W |
To Next Page
