4 Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation Guide • June 2002
FIGURE 2 Removing the System Cover
Attaching the Antistatic Wrist Strap
1. Unwrap the first two folds of the wrist strap. Wrap the adhesive side firmly
against your wrist.
2. Peel the liner from the copper foil at the opposite end of the wrist strap.
3. Attach the copper end of the wrist strap to the chassis (
FIGURE 3).
4. Disconnect the AC power cord from the system.
To Next Page
Loading...
