6 Sun Fire 280R Server Product Notes • April 2003
5. When you reach the console or setup window titled End, click the Confirm button.
The system displays the login window, in which you can enter your user name and
password to log in and begin using the system.
Solaris Operating Environment Patches
If you reinstall the Solaris operating environment, you may need to obtain required
patches from SunSolve. To verify the basic installation and configuration of your
system, Sun has created the Sun
SM
Install Check Tool. This one-time-use tool is
currently being offered at no charge over the web. After you complete the basic
installation and configuration of your system, you can use the tool to check the
following aspects of your Sun hardware:
■ Patches for the Solaris operating environment
■ System firmware levels
■ Unsupported hardware configurations
The tool identifies potential problems in these areas and provides recommendations
that you can use to resolve the problems.
You must accept the terms of the license agreement at the Sun Install Check Tool
web site in order to run the tool. Follow the directions at the web site to download
and use the Sun Install Check Tool.
The Sun Install Check Tool is available at:
http://sunsolve.sun.com/pub-cgi/show.pl?target=installcheck/
installcheck
You can also use the Solaris Patch Manager for on-going patch management. New in
Solaris 9, the Patch Manager provides automatic patch inventory and configuration-
based analysis of systems, automatic verification of digital patch signatures, and
automatic resolution of patch dependencies and install order.
To Next Page
