iii
Contents
Preface vii
1. System Setup 1–1
1.1 Safety and Compliance Information 1–1
1.2 Planning the Installation Process 1–2
1.3 Package Contents Inventory 1–3
1.4 Installing the Server Into a Rack With Optional Slide-Rails 1–4
1.4.1 Disassembling the Slide-Rails Before Installation 1–5
1.4.2 Installing the Mounting Brackets Onto the Server 1–6
1.4.3 Attaching the Slide-Rail Assemblies to the Rack 1–7
1.4.4 Installing the Server Into the Slide-Rail Assemblies 1–9
1.4.5 Installing the Cable Management Assembly 1–11
1.4.6 Attaching and Routing Cables 1–16
1.4.7 Verifying Operation of the Slide-Rails and CMA 1–17
1.5 Cabling the Server 1–17
1.5.1 Interconnecting Servers 1–19
1.6 Powering On the Server 1–20
1.7 Powering Off the Server 1–21
1.8 Using Serial Console Redirection 1–22
To Next Page
