EasyManuals Logo

Sun Microsystems Sun Fire X4150 Safety And Compliance Guide

Sun Microsystems Sun Fire X4150
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
ix
Safety Agency Compliance
Statement
Read this section before beginning any procedure. The
following text provides safety precautions to follow when
installing a Sun Microsystems product.
Safety Precautions
For your protection, observe the following safety
precautions when setting up your equipment:
Follow all cautions and instructions marked on the
equipment.
Ensure that the voltage and frequency of your power
source match the voltage and frequency inscribed on
the equipment’s electrical rating label.
Never push objects of any kind through openings in
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage
to your equipment.
Symbols
The following symbols may appear in this book:
Caution There is a risk of personal injury
and equipment damage. Follow the
instructions.
Caution Hot surface. Avoid contact.
Surfaces are hot and may cause personal
injury if touched.
Caution Hazardous voltages are present. To
reduce the risk of electric shock and danger to
personal health, follow the instructions.
Depending on the type of power switch your device has,
one of the following symbols may be used:
On Applies AC power to the system.
Off Removes AC power from the system.
Standby The On/Standby switch is in the
standby position.
Modifications to Equipment
Do not make mechanical or electrical modifications to the
equipment. Sun Microsystems is not responsible for
regulatory compliance of a modified Sun product.
Placement of a Sun Product
Caution Do not block or cover the openings
of your Sun product. Never place a Sun
product near a radiator or heat register.
Failure to follow these guidelines can cause
overheating and affect the reliability of your
Sun product.
Noise Level
Product: Sun Fire X4150 Server
Declared Noise emissions in accordance with ISO 9296
SELV Compliance
Safety status of I/O connections comply to SELV
requirements.
Operating Idling
LWAd (1B=10dB) 7.2 B 6.9 B
LpAm (TBD ) 58.1 dBA 55.3 dBA

Table of Contents

Other manuals for Sun Microsystems Sun Fire X4150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sun Microsystems Sun Fire X4150 and is the answer not in the manual?

Sun Microsystems Sun Fire X4150 Specifications

General IconGeneral
BrandSun Microsystems
ModelSun Fire X4150
CategoryServer
LanguageEnglish

Related product manuals