4-10 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
3. Use the showboards(8) command to check the XSB number, domain ID, LSB
number, and XSB status.
4. Use the version(8) command to check the OpenBoot PROM version of a
domain.
4.3 Adding or Removing Domains
The system can adopt a domain configuration by combining multiple system boards
in a server. Each domain can operate independently.
To configure domains for a server, use the XSCF Web console or the XSCF Shell
commands.
XSCF> showdomainstatus -a
DID Domain Status
00 Running
01 -
02 Powered Off
03 Panic State
04 Shutdown Started
05 Booting/OpenBoot PROM prompt
06 Initialization Phase
07 OpenBoot Execution Completed
XSCF> showboards -a
XSB DID(LSB) Assignment Pwr Conn Conf Test Fault
---- -------- ----------- ---- ---- ---- ------- --------
00-0 00(00) Assigned y y y Passed Normal
00-1 00(01) Assigned y y y Passed Normal
00-2 SP Available y n n Passed Normal
00-3 02(00) Unavailable y n n Unknown Normal
XSCF> version -c cmu
DomainID 0: 02.09.0000
DomainID 1: 02.09.0000
:
DomainID 3: 02.09.0000
To Next Page
Loading...
Need help?
General
