Important Safety Instructions
Please save this manual for future review.
This manual contains safety, installation and operation for Maximum Power Point
Tracking (MPPT) MAX series controller ("the controller" as referred to in this manual).
General Safety Information
Read carefully all the instructions and warnings in the manual before installation.
No user serviceable components inside the controller. DO NOT disassemble or
attempt to repair the controller.
Mount the controller indoors. Prevent exposure to the elements and do not allow
water to enter the controller.
Install the controller in a well ventilated -place. The controller’s heat sink may
become very hot during operation.
It is suggested to install appropriate external fuses/breakers.
Make sure to switch off all PV array connections and the battery fuse/breakers
before controller installation and adjustment.
Power connections must remain tight to avoid excessive heating from loose
connection.
To Next Page
Loading...