- 02 -
1. Camera Bench Test
When you take the camera out of the box, please
test the camera indoor first before mounting outside.
Adapter
Do NOT extend the power cable during the bench test because DC power drops
quickly along the transmission. A bench test helps you rule out all problems
caused by power supply. Underpower causes problems such as 1) PTZ issues 2)
unstable infrared (camera reboots repeatedly) and 3) spinning dome.
Type A: With DC12V Aadapter (non-PoE)
Type B: With PoE Injector/Switch
IP Camera
RouterPoE Injector
Computer
Computer
IP Camera
Router
To Next Page
Loading...
