Need help?Do you have a question about the SUNBA Network Series and is the answer not in the manual?
General| Series | Network Series |
|---|---|
| Category | Security Camera |
| Connectivity | Ethernet (RJ45) |
| Motion Detection | Yes |
| Night Vision | Yes, with IR LEDs |
| Weather Resistance | IP66 rated |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 50°C |
| Storage | Supports microSD card (up to 128GB) |
Details on powering non-PoE cameras, including voltage and cable considerations.
Explains PoE+ requirements, switch/injector features, and transmission distance limits.
Explains the importance of matching IP addresses and subnets for router, computer, and camera.
Methods to find the router's IP/Gateway using router stickers or computer network settings.
Guide to using the IP config tool (Device Manager) to set the camera's IP and Gateway.
Instructions for accessing and configuring the camera via Internet Explorer.
Explains P2P technology for remote access and its requirements.
Instructions to refer to portforward.sunba.net for port forwarding details.
Configuration options for camera recording plans, modes, and schedules.
Enables motion detection alerts, including format, region, and sensitivity settings.
To Next Page
