- 25-
Step 3. Enable the motion detection (in Video Detect or Video Motion).
See Chapter 13. Then enable the FTP option.
Snapshots: You must also enable snapshot in Video Detect.
Videos: You must also enable record in Video Detect. And you must also
have a storage media in order to upload the videos to FTP. Like many other
network cameras, you will need to have a TF card (installed inside the
camera’s built-in memory slot) or a NVR as a forwarding transfer station to
your FTP. This is required because without storage media, the camera does
not have enough RAM to hold large video les before it establishes a
connection with your FTP.
We would suggest that you control the Max
File Length to ensure the stable upload of the le.
To Next Page
Loading...
