SUNBA Network Series - IR Settings (Mode, Sensitivity); Pattern and Patrol Settings

- 18 -
SET FRAME SCAN LEFT
LIMIT POSITION IRIS
OPEN CONTINUE
SET FRAME SCAN
RIGHT LIMIT POSITION
IRIS OPEN CONTINUE
FRAME SPEED
It controls the speed when the dome does the 360° scan or frame scan.
DWELL TIME
It represents the residence time the dome stops at each preset during the
patrol/auto scan.
10. Camera Conguration
How to Access the Device Cong:
For IE: Click “DeviceCfg”
For VMS: Choose Device Cong
For CMS: Make a right click and select “Device Cong” (PS: You must
add the camera via H264DVR, not ONVIF)
This function enables the auto scan of the camera between a set left and
right boundary. It can be set using PRESET 81+Add & PRESET 82+Add
as well. When setting up the frame scan, direction keys are used to set the
position of the boundary. Thus, please click the Iris+ key to conrm your
setting.