SUNBA Network Series - The Full Preset List

- 15 -
Note: When pressing any direction key, the
camera will stop the patrol, scan & pattern.
Special Preset
0~50 Preset
XXX + Add Preset
XXX + CALL
95 + CALL
Conventional Position Preset
Set preset XXX.
Call preset XXX.
Open the On-Screen-Display menu of the camera
Shift to English OSD menu
Shift to Chinese OSD menu
Set the left boundary of frame scan for 507 series
Set the right boundary of frame scan for 507 series
Set the left boundary of frame scan for 601&805&405 series
Set the right boundary of frame scan for 601&805&405 series
Start pattern
Patrol from 1 to 10 preset
Start frame scan ( auto scan from left side to the right side)
47 + Add Preset
48 + Add Preset
81 + Add Preset
82 + Add Preset
82 + CALL
84 + CALL
88 + CALL
89 + CALL
90 + CALL
91 + CALL
81 + CALL
98+ CALL
93+ CALL
94 + CALL
100 + CALL
101+ CALL
102+ CALL
103 + CALL
120+ CALL
121+ CALL
83+ CALL
81+ CALL
92+ CALL
Patrol from 11 to 20 preset
Patrol from 21 to 30 preset
Patrol from 31 to 40 preset
360° interval scan for 507 series
360° continuous scan
Display preset information from upper left corner
Hide preset information from upper left corner
Manually turn IR on (half side on)
Manually turn IR off
Set the IR mode to auto (default)
Manually turn IR on (all side on)
Display the value of photoresister for 507 serises
Hide the value of photoresister for 507 serises
Clear all preset
Reset the PT position for 601&405 series
Reset the PTZ dome
84 + Add Preset
95+CALL followed by
93 + CALL
95+CALL followed by
94 + CALL
Set pattern followed by different action inputs;
conrm by clicking “IRIS+” button
Function
8.The Full Preset List
preset1
preset2
preset3