1.Before using your Fairy Floss Maker for the
first time ensure that all packing material
is removed.
2.Wash the extractor head assembly and
bowl using warm and soapy water, dry
thoroughly.
3.Align the interlocking tabs on the fairy
floss maker with the tabs on the bowl. Turn
the bowl anti-clockwise onto the base and
lock into position. Please refer to graphics
on the unit and side of bowl.
4.Assemble the extractor head assembly to
the fairy floss maker ensuring that the
head is fitted correctly and securely.
NOTE: Should the Extractor Head Assembly
not be attached properly failure in
producing fairy floss may occur and the
unit may cause excessive vibration.
4
Assembly Instructions
To Next Page
Loading...
