Sunbeam Intuitive EM8910 - Factory Reset Procedure

30
• To return to the coffee mode, press the
“MENU” button or wait 30 seconds for the
espresso machine to return automatically
to the coffee mode.
Resetting the espresso machine to the factory
setting (Reset)
This function is used to reset changes you
have made to the factory settings.
The following settings or saved values are
affected: Water hardness
Cup measures/coffee strength
Coffee temperature
Sleep mode
• Press the “MENU” button, see figure
40. The menu setting <<LANGUAGE>>
appears.
• Press the scrolling buttons
▼
or
▼
until
the menu setting <<FACTORY RESET >>
appears.
• Confirm the menu setting by pressing the
“OK” button, see figure 41. The display
shows <<RESET>>.
• Confirm the menu setting by pressing the
“OK” button, see figure 41. The display
shows <<RESET PROGRAMMED>>. The
espresso machine is now reset to the
factory settings.
Note: After programming the display returns
to the menu setting <<FACTORY RESET>>.
• To return to the coffee mode, press the
“MENU” button or wait 30 seconds for the
espresso machine to return automatically
to the coffee mode.
Menu settings (continued)