12
1. Place the blender jug onto the motor base.
Note: Do not switch on the Blender without
the lid in position.
2. Place ingredients into the glass jug. Do not
exceed the maximum indicated level – 1.5
litres.
3. Position the lid with ingredient cup onto
the blender jug. Ensure the lid is firmly in
place.
4. Using the control dial, select the desired
blending speed 1, 2 or PULSE.
Note: Although the lid fits firmly to the
glass jug, we advise when blending liquid
ingredients, to place your hand on the lid
as you initially select the blending speed/
function. As the powerful 1,000 watt motor
could cause the liquid to surge up causing
leakage. Once you have started blending you
can remove your hand.
Note: Do not operate for more than 2 minutes
at a time.
Further ingredients can also be added whilst
blending by removing the ingredient cup and
pouring ingredients through the hole in the
lid.
5. After you have completed blending, turn
the control dial to the ‘off’ position.
Note: Do not blend hot ingredients.
Using your Blender
To Next Page
Loading...
Need help?
General
