13
Store the MultiProcessor™ Compact on your
benchtop or within a kitchen cupboard.
The motor base should be stored on a clean
flat surface with the processing bowl in
position. All of the attachments can be stored
within the processing bowl.
Place the processing blade (with protective
cover) in position over the spindle then place
in the sliding blades, the whisk and dough
blade. Place the disk holder on top of the
spindle and lock into place the processing
cover.
The two food pushers can be positioned in
the feed chute.
The power cord can be stored within the cord
storage at the back of the motor base.
Storing your Food Processor
To Next Page
Loading...
