Need help?Do you have a question about the Sunbeam Oskar Mini LC3200 and is the answer not in the manual?
General| Speed Settings | 2 |
|---|---|
| Pulse Function | Yes |
| Dishwasher Safe Parts | Yes |
| Bowl Material | Plastic |
| Blades | Stainless steel |
Activates the safety system; must be correctly positioned and locked for operation.
The base houses a 600 watt motor for consistent processing results.
Large button to start and stop the food processor operation easily.
Allows for total control over processing tasks.
Unique design for convenient storage of attachments within the appliance.
Guides food vertically to the blade for best results; doubles as a measuring cup.
Guides ingredients to the blades and allows adding during processing tasks.
Drives all attachments; must be in place for operation.
Offers 3 cup/750mL dry and 2 cup/500mL liquid processing capacity.
Allows unused cord length to be pushed into the base for storage.
Keeps the food processor secure on the bench top during use.
Smooth-edged blade for cutting, kneading, whisking, and emulsifying.
Allows for both thick and thin slicing.
Offers fine or coarse shredding results.
Fit spindle onto drive shaft and ensure blade locks into place.
Fit processing blade over spindle and press firmly into place.
Fit chosen disc over spindle and press firmly into place.
Holds the slicing blade and shredding disc conveniently within the unit.
The power cord can be stored by pushing it into the back of the motor base.
Use 750mL max for dry ingredients, 500mL max for liquids.
Process uniformly sized pieces. Avoid overloading for consistent results.
Pre-cut meat into cubes approximately 2cm square.
Peel and quarter or cut large vegetables into eighths.
Add dry ingredients before processing; liquids via feed tube during operation.
Crucial for slicing/shredding success; pack food firmly.
Pack feed tube firmly. Use food pusher, not fingers.
Pack food items vertically in the feed tube.
Chill softer foods; use room temperature for harder foods.
Remove cover, then bowl. Wait for blades to stop before removal.
Plastic components may deteriorate. Place on top rack only.
Freeze portions in ice cube trays, then transfer to bags. Thaw as needed.
To Next Page
