Need help?Do you have a question about the Sundance Spas Denali and is the answer not in the manual?
Details compliance with FCC rules regarding radio frequency interference and how to correct it.
Safety instructions specific to Canada, focusing on electrical connections and grounding.
Explains the risks and symptoms associated with prolonged immersion in hot water.
Provides essential cautions for spa users regarding health, safety, and environmental factors.
Covers essential electrical safety guidelines for spa installation and operation.
Offers considerations for selecting an ideal outdoor location for the spa.
Details important factors for installing a spa in an indoor environment.
Details power configurations for North American models operating at 60Hz.
Lists power options for export models operating at 50Hz.
Explains the functions and layout of the spa's control panel.
Instructions on how to adjust and set the spa's water temperature.
Details how to turn on and operate the spa's jet pumps.
Explains operation of SunGlow, Standard, and LED lighting systems.
Guide on how to adjust the water flow from individual spa jets.
Explains how to customize massage experience using the massage selector valve.
Information on using and managing the spa's air controls.
Details the features and operation of the optional audio system.
Details standard modes for spas without a circulation pump.
Details standard modes for spas with a circulation pump.
Explains economy modes for reduced energy consumption.
Describes lock modes for service or preventing unauthorized use.
Instructions on how to choose between different filtration/heating modes.
Details filtration modes for models without a circulation pump.
Details filtration modes for models with a circulation pump.
Step-by-step guide for cleaning the spa's filter cartridges.
Instructions on how to drain and refill the spa water.
Guidance on cleaning and maintaining the spa's headrest pillows.
Instructions for cleaning the spa's interior surface safely.
Tips for caring for and maintaining the spa's insulating cover.
How to clean and maintain the spa's exterior cabinet.
Procedures for preparing the spa for cold weather to prevent freezing.
Steps for safely restarting the spa after cold weather storage.
Explains the importance and method of controlling spa water pH levels.
Guidance on using sanitizers to maintain clean and healthy spa water.
Information on the optional CD Ozone system for water purification.
Explains the 'summer logic' feature for spas with a circulation pump.
Describes the 'SN1' error code related to sensor malfunction.
Explains the 'SN2' error code indicating sensor issues.
Troubleshooting for 'FL1' or 'FL2' error codes on specific models.
Troubleshooting for 'FL1' or 'FL2' error codes on models with circulation.
Explains the 'COL' message and its meaning.
Describes the 'ICE' display indicating freeze protection activation.
Explains the 'OH' error code for overheat conditions.
Interprets the '---' display indicating a system watchdog trigger.
Steps to diagnose when no spa components are functioning.
Troubleshooting steps for when the pump fails but the light works.
Advice for resolving issues with weak or inadequate jet performance.
Simple solution for when the spa water temperature is excessively high.
Troubleshooting steps to address a lack of heating in the spa.
General| Heater | 5.5kW |
|---|---|
| Insulation | Full Foam |
| Ozone System | Optional |
| Shell Material | Acrylic |
| Cabinet Material | Synthetic |
| Lighting | LED |
| Electrical Requirements | 240V |
To Next Page