Sunfar E500-4T0015(B) - User Manual

Preface
Thanks for choosing the E500 series universal low-power inverter produced
by Shenzhen Sunfar Electric Technologies Co., Ltd.
This Manual is the operating manual for E500 series universal low-power
inverters. It
provides all relevant instructions and precautions for installation,
wiring, functional parameters, daily care and maintenance, fault diagnosis and
troubleshooting
of E500 series inverters.
In order to use this series of inverters correctly, guarantee product's best
performance and ensure safety of users and equipment, be sure to read this
manual carefully before using E500 series inverters.
Improper use may cause
abnormity and malfunction of the inverter, reduce its service life and even
damage equipments and lead to personal injury and death etc.
This user manual is delivered with the device. Please keep it properly for
future overhaul and maintenance.
Owing to constant improvement of products, all data may be changed without
further notice.
SHENZHEN SUNFAR ELECTRIC TECHNOLOGIES CO., Ltd.
User Manual of E500 Series Universal Low-Power Inverter
Version V1.0
Revision Date: Mar. 2015
HRW Limited
admin@hrw.hk
www.hrw.hk

Summary

Precautions

Safety precautions

General safety guidelines for inverter operation and installation.

Installation

Guidelines for safe and correct inverter installation.

Wiring

Guidelines and precautions for connecting inverter wiring.

Product Introduction

Product technical indicators and specifications

Technical data and specifications for the E500 series inverters.

Inverter Installation

Environmental requirements

Conditions for the installation environment to ensure proper operation.

Installation dimension of inverters

Physical dimensions and mounting details for inverter installation.

Inverter Wiring

Wiring precautions

Essential safety and operational precautions for inverter wiring.

Wiring of peripheral elements

Wiring diagrams and specifications for peripheral devices.

Basic wiring

General wiring diagram for basic inverter setup.

Wiring of main loop terminal

Wiring of control loop terminal

Operating Panel

Function description of keys

Panel operating method

Simple operation of the inverter

Function Parameter Table

Function Details

Basic running parameter group

Analog input output parameter group

Auxiliary running parameter group

Multi-speed and senior running parameter group

Communication functional parameter group

PID parameter group

Fault Diagnosis And Countermeasures

Protection function and countermeasures

Explanation of protection functions and how to resolve faults.

Fault record query

Fault reset

Procedures for resetting the inverter after a fault.

Sunfar E500-4T0015(B) Specifications

General

Model	E500-4T0015(B)
Power	1.5 kW
Rated Output Power	1.5 kW
Rated Output Current	3.7 A
Protection Level	IP20
Humidity	5% to 95% (non-condensing)
Input Voltage	380V
Frequency Range	50Hz/60Hz
Operating Temperature	-10°C to +40°C
Storage Temperature	-20°C to +60°C
Altitude	Below 1000m (derating above 1000m)