Sunfar E500-2S0022(B) - User Manual

Preface
Thanks for choosing the E500 series universal low-power inverter produced
by Shenzhen Sunfar Electric Technologies Co., Ltd.
This Manual is the operating manual for E500 series universal low-power
inverters. It
provides all relevant instructions and precautions for installation,
wiring, functional parameters, daily care and maintenance, fault diagnosis and
troubleshooting
of E500 series inverters.
In order to use this series of inverters correctly, guarantee product's best
performance and ensure safety of users and equipment, be sure to read this
manual carefully before using E500 series inverters.
Improper use may cause
abnormity and malfunction of the inverter, reduce its service life and even
damage equipments and lead to personal injury and death etc.
This user manual is delivered with the device. Please keep it properly for
future overhaul and maintenance.
Owing to constant improvement of products, all data may be changed without
further notice.
SHENZHEN SUNFAR ELECTRIC TECHNOLOGIES CO., Ltd.
User Manual of E500 Series Universal Low-Power Inverter
Version V1.0
Revision Date: Mar. 2015
HRW Limited
admin@hrw.hk
www.hrw.hk

Summary

Product Introduction

Technical Specifications and Indicators

Details the technical capabilities and specifications of the inverter.

Inverter Installation

Environmental Requirements for Installation

Specifies conditions for safe and optimal inverter installation.

Inverter Wiring

Wiring Precautions and Safety

Safety guidelines and best practices for inverter wiring.

Wiring Peripheral Elements

Details how to connect external components to the inverter.

Basic Inverter Wiring Diagram

Main Loop Terminal Wiring

Control Loop Terminal Wiring

Operating Panel

Panel Operating Methods

Simple Inverter Operation

Basic steps for initial setup and running the inverter.

Function Parameter Table

Basic Running Parameter Group

Covers fundamental parameters for inverter operation and settings.

Analog Input;Output Parameter Group

Multi-Speed Running Parameter Group

PID Parameter Group

Parameters for Proportional-Integral-Derivative (PID) control.

Function Details

Communication Functional Parameter Group

Fault Diagnosis and Countermeasures

Protection Functions and Countermeasures

Lists common faults, their causes, and solutions.

Fault Record Query

Fault Reset Procedures

Procedures for resetting the inverter after a fault occurs.

MODBUS Protocol Specification

MODBUS Communication Settings

Sunfar E500-2S0022(B) Specifications

General

Model	E500-2S0022(B)
Category	Inverter
Power	2.2 kW
Cooling Method	Forced Air Cooling
Output Frequency	0-400Hz
Protection Features	Overload, Overvoltage, Short Circuit, Overheat
Operating Temperature	-10°C to +40°C
Storage Temperature	-20°C to +70°C
Humidity	5% to 95% (Non-condensing)