Sunfar E500-2S0015(B) - User Manual

Preface
Thanks for choosing the E500 series universal low-power inverter produced
by Shenzhen Sunfar Electric Technologies Co., Ltd.
This Manual is the operating manual for E500 series universal low-power
inverters. It
provides all relevant instructions and precautions for installation,
wiring, functional parameters, daily care and maintenance, fault diagnosis and
troubleshooting
of E500 series inverters.
In order to use this series of inverters correctly, guarantee product's best
performance and ensure safety of users and equipment, be sure to read this
manual carefully before using E500 series inverters.
Improper use may cause
abnormity and malfunction of the inverter, reduce its service life and even
damage equipments and lead to personal injury and death etc.
This user manual is delivered with the device. Please keep it properly for
future overhaul and maintenance.
Owing to constant improvement of products, all data may be changed without
further notice.
SHENZHEN SUNFAR ELECTRIC TECHNOLOGIES CO., Ltd.
User Manual of E500 Series Universal Low-Power Inverter
Version V1.0
Revision Date: Mar. 2015
HRW Limited
admin@hrw.hk
www.hrw.hk

Summary

Precautions

1. Precautions of unpacking inspection

2. Safety precautions

Guidelines for safe operation, installation, and maintenance.

2.2 Wiring

Instructions and precautions for connecting the inverter's wiring.

3. Precautions of use

Product Introduction

1.4 Product technical indicators and specifications

Detailed technical specifications and performance indicators of the E500 series.

Inverter Installation

2.1 Environmental requirements

Conditions for the installation environment to ensure optimal performance and safety.

2.2 Installation dimension of inverters

Inverter Wiring

3.1 Wiring precautions

Critical safety and connection guidelines for inverter wiring.

3.2 Wiring of peripheral elements

3.3 Basic wiring

3.4 Wiring of main loop terminal

Specific wiring instructions for the main power loop terminals.

3.5 Wiring of control loop terminal

Details on connecting the control loop terminals and their functions.

Operating Panel

4.1 Function description of keys

Explanation of the function and purpose of each key on the operating panel.

4.2 Panel operating method

Step-by-step guide for navigating and operating the inverter via the panel.

4.3 List of status monitoring parameters

4.4 Simple operation of the inverter

Function Parameter Table

Basic running parameter group

Auxiliary running parameter group

Multi-speed and senior running parameter group

PID parameter group

Fault Diagnosis And Countermeasures

7.1 Protection function and countermeasures

Table of fault codes, causes, and solutions for inverter protection functions.

7.2 Fault record query

7.3 Fault reset

Procedures for resetting the inverter after a fault condition.

SUNFAR Self-Defined Communication Protocol

1.2 Bus Structure and Protocol Specification

MODBUS Protocol Specification

Sunfar E500-2S0015(B) Specifications

General

Power	1.5 kW
Efficiency	98%
Frequency	0 Hz - 400 Hz
Protection Features	Overload, Overvoltage
Input Voltage	220-240 V AC