Precautions I
E500 Series Universal Low-Power Inverter
Precautions
E500 series universal low-power inverters are applicable to general industrial
single-phase
and three-phase AC asynchronous motors. If this inverter is used for
equipment which is failed and may cause personal injury (e.g. nuclear control
system, aviation system, safety equipment and instruments), please take care and
consult with the manufacturer; if it is used for dangerous equipment, that
equipment should be provided with safety protecting measures to prevent accident
expansion in the case of inverter failure. The inverter is produced under strict
quality assurance system. However, in order to protect your personal safety and
equipment and property safety, before using this inverter, please read this chapter
carefully and conduct transportation, installation, operation, commissioning and
inspection according to relevant requirements.
1. Precautions of unpacking inspection
When unpacking, please confirm if
(1) There is any damage during transportation and any components are damaged
or dropped.
(2) The model and specifications stated on the inverter nameplate is consistent
with your order. If there is any omission or damage, please contact your
supplier promptly.
◆ Nameplate of the inverter
On the left side of the inverter body, there is a nameplate marked with the
model and rated parameters of the inverter.
◆ Label on the outer box
Inverter model
Bar code
Product serial number
Rated output capacity and current
Rated input voltage phase, voltage and frequency
E500-2S0007
TYPE:
1.9KVA 5.0A
XXXXXXXXXX
OUTPUT:
SERIAL No.:
SOURCE: 1PH 220V 50/60Hz
1PH 220V 50/60Hz
KG
KG
XXXXXXXXXX
(mm)
SERIAL No.:
VOLUME:
NET WEIGHT:
GROSS WEIGHT:
SOURCE:
TYPE:
SOURCE:
TYPE:
E500-2S0007
Net weight
Bar code
Inverter model
Rated input voltage phase, voltage and frequency
Gross weight
Volume
Serial number
To Next Page
Loading...
Need help?
General
