3
+1 (855) 251-1649
sunfireheaters.com
...in Canada:
NO GASOLINE!
This product is designed for use with Diesel, No.2 heating oil, or kerosene ONLY!
• Installation of the unit shall be in accordance with the regulations of the authorities having
jurisdiction. Refer to CSA standard 39-1962: Installation Code for Oil-Burning Equipment, for
Recommended Installation Practice.
• To avoid added risk of fire or explosion, never use gasoline, crankcase drainings, naphtha,
paint thinners, alcohol, or any other unapproved fuels.
• Never use the heater in areas where aerosol cans, gasoline, paint thinner, or other highly
flammable materials are stored.
• Visually inspect the heater before each use. Never use a heater that has been damaged,
broken, or modified from manufacturer’s specifications.
• Before filling the fuel tank, extinguish all nearby flames, including the radiant heater and wait
for the heater to cool down.
• While filling the tank inspect the fuel lines and their junctions to check for fuel losses. Any losses
or leaks must be repaired before resuming operation of the radiant heater.
• Fuel should always be stored in compliance with safety regulations.
• When you move or store the heater, maintain it in a level position in order to avoid fuel loss or
drain the fuel into an appropriate receptacle.
• Keep children and animals away from the heater.
• Disconnect the heater from electrical power when it is not in use and has completed a post-
purge cycle after power button has been placed in the OFF position.
• When it is controlled by another device (like a thermostat or a timer), the heater could turn
itself on at any time. Please be aware of this and observe all safety precautions.
• Never operate the heater in unoccupied or unattended areas.
• Do not block vents or openings on any part of the heater at any time.
• When the heater is in use and connected to the power supply, it should never be moved,
handled, or refilled and no maintenance should be performed on it.
WARNING
!
⛽
To Next Page
Loading...
