19
+1 (855) 251-1649
sunfireheaters.com
Loosen the knobs on the sides of the unit to adjust the tilt angle of the dome face. Tighten the knobs
when adjustment is complete. Return the tilt angle to it’s non-inclined position and tighten the
adjustment knobs for storage or transport of the unit.
ADJUST TILT ANGLE
This section will cover normal orientation and operation of the SunFire SF-80 / SF-120.
TO ADJUST THE TILT ANGLE:
The unit will ship with the handle secured in place by a hook and loop retaining strap (not shown). This should
be left on the frame and reused when transporting the heater in the future. To raise the handle position, undo
the retaining strap. Then, lift the handle.
LOWER THE HANDLE
RAISE THE HANDLE
When the heater is in use and connected to the power supply, it should never be moved, handled,
or refilled and no maintenance should be performed on it. Allow the unit to cool completely before
moving.
TO OPERATE THE HANDLE:
Reuse the retaining strap to secure the handle in the lowered position when transporting
the heater.
Normal Operation:
DANGER
!
To Next Page
Loading...
