18
+1 (855) 251-1649
sunfireheaters.com
TO ASSEMBLE THE UNIT (CONT.):
9. [OPTIONAL] Assemble the lifting bracket and use a 7/16” wrench and a 1/2” wrench to secure it with
the bolt, washers, locking washers, and nuts provided in the packaging.
The unit is now ready for normal operation.
ASSEMBLE LIFTING BRACKET ATTACH LIFTING BRACKET
Getting Started:
DO NOT operate the unit without the the dome guard and visor in place. These are important
safety components and are required.
8. With a 5/16” powered driver, use the visor screws provided to affix the dome visor to the top of the
dome face. Start at one end of the visor and move along the length of the visor to shape it to the
dome. Do not tighten the screws completely until all fasteners have been started, then go back and finish
securing all screws.
ATTACH VISOR
WARNING
!
To Next Page
Loading...
