Need help?Do you have a question about the Sunfire XTEQ12 and is the answer not in the manual?
Adjusts the high frequency cutoff point of the subwoofer to blend with main speakers.
Matches the subwoofer's output level to other speakers in the system.
Adjusts the relative phase of the subwoofer for optimal system blending.
Allows automatic turn-on from standby mode via a 12 VDC signal.
Connects unbalanced audio sources using RCA patch cords.
Provides active line level outputs for connecting to an amplifier.
Connects to XLR balanced line-level outputs for superior noise cancellation.
Selects output signal range for line level outputs (Bypass or 85 Hz).
Enables connection and control of multiple XTEQ subwoofers.
Used for installing, uninstalling, and power conservation.
Connection point for the detachable line cord and fuse protection.
Allows setting the subwoofer to local region AC mains voltage.
Indicates feedback during Room EQ and operation status.
Initiates the automatic Room EQ procedure.
Toggles the equalization feature on or off.
Connection for the supplied linear measurement microphone.
Indicates AC power connection and unit status.
Addresses issues of weak bass output from the subwoofer.
Specific advice for insufficient bass in a 5.1 surround sound setup.
To Next Page
General