What to do if Sunforest H-100 show incorrect Brix measurement?
If the Brix measurement value deviates from the standard range (5 ~ 25 Brix or adjustable) when using Sunforest Measuring Instruments, ensure that the calibration model is suitably selected for the relevant fruit and then re-measure.
Why Sunforest H-100 Measuring Instruments fail during initialization or reference value measurement?
If you experience issues when initializing or measuring the reference value on your Sunforest Measuring Instruments, ensure that the head-cover of the measuring part is properly closed and that the reference material (white Teflon) inside the cover is not severely damaged. Then, restart the booting (initialization).
How to troubleshoot Sunforest H-100 Measuring Instruments when power doesn't turn on?
If your Sunforest Measuring Instruments do not turn on, charge the instrument for more than 30 minutes and then try to turn it on again.
How to prevent light interference when measuring Brix with Sunforest H-100?
If you are getting errors while measuring Brix with Sunforest Measuring Instruments, and direct sunlight or indoor lamps are excessively infiltrating the measuring part, block the direct sunlight or use the instrument under protection from light incidence.
What to do if there is charging abnormality with Sunforest Measuring Instruments?
If you notice an abnormality during charging of your Sunforest Measuring Instruments, check if the charger’s plug connected to the charging terminal is properly inserted.
Why are Sunforest Measuring Instruments affected by temperature?
The spectrometer sensor built in the Sunforest Measuring Instruments is influenced by temperature. Use the instrument within standard temperature range for accuracy assurance.
What to do if Sunforest H-100 Measuring Instruments fail during initialization or measurement due to low battery?
If you face issues during initialization, reference value measurement, or Brix measurement with Sunforest Measuring Instruments, immediately charge the battery, as the problem may be due to lack of battery power.
What causes errors in Brix measurement with Sunforest Measuring Instruments?
When measuring Brix with Sunforest Measuring Instruments, ensure that the object fruit is properly placed on the measurement part of the instrument. Check the status of the object fruit to make sure the size of object fruit is neither so small or too big, or the fruit is not excessively rotten or damaged, or the surface is not moist.
What does it mean if Sunforest H-100 fail during initializing?
The instrument can not be used. Need to contact A/S center immediately.
Adjusts calibration value by decreasing it by -0.1 scale.
Adjusts calibration value by increasing it by +0.1 scale or activates Bluetooth.
Used to setup measuring conditions like deviation adjustment and calibration model selection.
Used to turn the instrument on or off.
Adjusts deviation value or navigates saved measurement data.
Indicates the instrument is operating normally.
Indicates there is an error in the instrument's operation.
Indicates that the Bluetooth function is active.
Displays the instrument's environment temperature in Celsius.
Shows the current status of the instrument's battery charging.
Displays the stock number of measurements taken.
Shows the adjusted deviation value in Brix.
Protects optical sensors and acts as a reference for standardization.
Used for charging the instrument's battery; specifies power input/output.
Instructions for charging the instrument's battery, including indicators and time.
Instructions for powering the instrument on and off using designated buttons.
Step-by-step flowchart for taking a measurement.
Process to diagnose the instrument and set it to zero for measurement.
Guides on setting up measuring parameters, deviation adjustment, and calibration models.
Adjusts deviation between instrument reading and reference value from squeezed juice.
Allows selection of different calibration models for various fruits.
How to view stored readings and reset the measurement counter.
Connects the instrument to a smartphone app for data display and management.
Scans the reference material for initial calibration and measurement setup.
Guides on properly positioning the fruit for accurate measurement.
Instructions on how to clean the instrument's optical parts and body.
Connects the instrument to a PC for data management and calibration updates.
Troubleshooting steps for when the instrument fails to power on.
Explains potential deviations due to operating outside temperature limits.
Checks for issues related to the charging status lamp or connection.
Explains error codes and their countermeasures displayed on the LCD.
Explains the distinction between sugar amounts and Brix measurement.
Discusses how measurement area and juice extraction affect sugar content readings.
Evaluates calibration model performance using R2 and SEC values.
Guides on adjusting calibration models for variations in fruit type, environment, etc.
Instructions for users to create new calibration models using provided software.
Lists detailed technical specifications of the instrument.
Lists the items included in the product package.
General| Brand | Sunforest |
|---|---|
| Model | H-100 series |
| Category | Measuring Instruments |
| Language | English |
To Next Page
