To safely and correctly use the product as well as prevent accidents and risks, the user must take
the following precautions for safety.
Caution Physical injury or damage on product may occur when the user doesn’t
comply with the directions.
1. The product is a measurement instrument made of very precise optical components. Dropping
the product or exposing it to impacts may damage the product or cause malfunctioning.
2. In case the product is damaged by unauthorized disassembling or exposure to impacts, free
repair service will not be given. Keep the serial number of the product and inform to service
representative for technical assistance if any required.
3. Dusts or impurities on the optical components of the measurement part may increase the error
of measurement. Check if the measurement part is dirty, and clean it before use.
4. To clean the optical components of the measurement part, moist a cotton swab with the alcohol
provided and air-dry before use.
5. Before measurement, remove the impurities (dusts, pesticides, fertilizers, etc.) and moist on the
surface of the fruit.
6. To clean the main body of the product, use smooth and dry cloth. Never use chemical solvents
such as benzene or thinner.
7. When the product is wet, do not put it in a heating instrument (heater, microwave oven, etc.) to
dry it. When water gets into the product, contact the A/S center immediately and follow the
directions given.
8. Using chargers other than the one given with the product may reduce the life of the battery or
even cause fire. Make sure that the charger terminal on the bottom of the product handle doesn’t
contact with water or products with electric current flowing.
9. Impacting the LCD with sharp objects may cause scratches, cracks or malfunctioning.
10. Do not use the product in dusty environment, or places with excessive temperature or humidity.
11. When the product is not in use for a long time, be sure to fully charge the product, remove
dusts or impurities on the measurement part, put it in the storage case and keep it inside a cool
and dry indoor area.
12. When malfunctioning or abnormalities occur, do not try to solve the problem by yourself.
Instead, contact the A/S center and follow the directions given.
To Next Page
Loading...
Need help?
General
