- 11 -
even when the charging time exceeds extraordinary over time.
7. It is recommended to place the instrument on the desktop stand during battery charging.
Using a charger other than provided genuine charger may diminish battery life or cause
electrical damage to the instrument. Keep the charger terminal away from water or electricity-
flowing object.
When the charging LED lamp blinks or turned off, check if DC plug of the charger is
properly connected to the charging terminal.
■ Instrument Turn on and off
1. To turn on the instrument, press shortly.
2. To turn off the instrument, press for longer than 1 second.
When abnormal operation occurred during the use or if not able to turn on the instrument,
try to charge the instrument for about 30 minutes. Then, try to operate or turn on the instrument
again. If the problem continues, please contact authorized service representative.
For saving the battery and safety purpose, the instrument will be automatically turned off
when remaining battery capacity is running down.
■ Measurement procedure
■ Initializing the instrument
1. Initializing process is conducted to diagnose the condition of the instrument and to scan the
reference material of the head cover, so that the instrument is set to zero(standard) and ready to
measure object fruit. Initialization of the instrument is automatically conducted when the power is
turned on.
To Next Page
Loading...
Need help?
General
