CHAPTER
FOUR
START TO PLAY
PiPower Pro can be integrated into Home Assistant. To do this, you need to have a Raspberry Pi with HassOS installed.
Please follow the link below for setup.
4.1 Install the HassOS
This section will guide you in installing the Home Assistant operating system on your Raspberry Pi. Please note that
this process will result in the loss of all existing content on your Raspberry Pi system. It is important to backup your
data before proceeding.
Step 1
Raspberry Pi have developed a graphical SD card writing tool that works on Mac OS, Ubuntu 18.04 and Windows, and
is the easiest option for most users as it will download the image and install it automatically to the SD card.
Visit the download page: https://www.raspberrypi.org/software/. Click on the link for the Raspberry Pi Imager that
matches your operating system, when the download finishes, click it to launch the installer.
Step 2
When you launch the installer, your operating system may try to block you from running it. For example, on Windows
I receive the following message:
If this pops up, click on More info and then Run anyway, then follow the instructions to install the Raspberry Pi
Imager.
19
To Next Page
Loading...
