SunFounder Pironman
3. Click CONFIGURE -> SUBMIT -> FINISH. Afterward, you will see mqtt under Configured.
4. Configuring MQTT Using the Dashboard
To set up MQTT for Pironman U1, you have two options: configuring it through the dashboard or via the command
line. We recommend using the dashboard for ease of use.
1. If you select the Show in sidebar option in the Pironman U1 add-on and then refresh the webpage, you will be
able to open the Pironman U1 dashboard from the sidebar.
7.5. 5. Home Assistant MQTT Integration 95
To Next Page
Loading...