SUNFRE S10 - NP07: Motor Forward;Reversal; Appendix VII: Digitron Display Code and Meanings; STAT (START); RESU(RESUME)

15 16
0 is no arm detection(default), 1 is with arm detection, when no arm
detected, barrier gate not working.
NP07: Motor forward/Reversal(000/001)
Appendix VII Digitron Display Code and Meanings
digitron display
meaning
STAT (START)
The system is starting
RESU(RESUME)
The gate is resetting
CHAS(CHACK SENSOR)
Sensor check
E-PL(ERROR PULSE)
Motor Default Phase
E-CS
Gate operation overtime
RUNX
（
X is the system operation
Mode and the Setting Value of LP02）
System Normally Operating
dPXX
Menu Driven Display
NPXX
no User Menu Display
P-H
Dates resuming to be Default Value
P-F
Dates resuming Default Value
NOPR（NO POWER）
Opening when no power
TEST
Gate self testing
INXX(IN NUM)(xxthe entering
vehicle quantity display)
the entering vehicle quantity display
LPXX
Logic Menu Display