2
The SG100K3 may be damaged irreversibly by electrostatic discharge
(ESD) at its components.
•During the operation of SG100K3, please observe all t
safety regulations!
•Discharge any ESD by touching the grounded SG100K3 conductor
before contacting any electronic components!
Thoroughly inspect the equipment prior to energizing. Verify that no
tools or equipment have inadvertently been left behind.
CCaution
::
SService Safety
Never work alone when servicing this equipment. Two persons are
required until the equipment is properly de-energized, locked out and
verified de-energized with a meter.
NNote
::
KKeep
TT
hhis Manual
Please keep this installation manual and other related document in the
handy place of the SG100K3.
These documents must be available to operators and maintenance
personnel at all times.
To Next Page
Loading...
Need help?
General