Sungrow SG100K3 - 3.7. Moving After Unpacking

15
3
3.7.
Move the SG100K3 after Unpacking
Using a forklift to move the SG100K3:
1. Place the forks of the forklift below the unit at the points specified in Figure
3-2.
2. Lift the SG100K3 from beneath the enclosure.
Be sure to use a forklift with a sufficiently spaced fork span.
Remove the pallet from underneath the unit.
Users can not move the enclosure using the lifting eyebolts.
Figure 3-3 Lift the SG100K3