Sungrow SG100K3 - 3.5. Moving the SG100 K3 Unit; 3.6. SG100 K3 Unpacking Procedure

14
3
3.5.
Moving the Unit
To move the crate that contains the SG100K3:
1. Place the forks of the forklift to the bottom of wooden crate.
2. Elevate the SG100K3 from beneath the wooden crate.
Figure 3-2 Forklift lifting locations – underneath pallet
3.6.
Unpacking the Unit
To unpack the SG100K3 from the shipping crate:
1. Remove the crate’s wood side and top panels.
2. Remove the barrier bag material from the inverter.
3. Remove the inverter’s anchor hardware that bolts the inverter to the pallet.