138
Parameter SG7.0RT-P2 SG8.0RT-P2
Topology Transformerless
Degree of protection IP65
Operating ambient temper-
ature range
-25℃ to +60℃
Allowable relative humidity
range (non-condensing)
0–100 %
Max. operating altitude 4000 m (> 2000 m derating)
Cooling method Natural cooling
Display LED
Communication WLAN / Ethernet / RS485 / DI / DO
DC connection type MC4 (Max. 6 mm
2
)
AC connection type Plug and play
Country of manufacture China
* The inverter enters standby state when the input voltage ranges between 1,000 V and
1,100 V. If the maximum DC voltage in the system can exceed 1,000 V, the MC4 connectors
included in the scope of delivery must not be used. In this case MC4-Evo2 connectors must
be used.
** The voltage difference between MPPTs should be less than 150 V. The voltage of the con-
figured string should be higher than the lower limit of the rated MPPT voltage.
*** For inverters without a DC switch, it is necessary to prepare an external DC switch ac-
cording to AS 60947.3.
Parameter SG10RT-P2 SG12RT-P2
Input (DC)
Recommended max. PV in-
put power
15.0 kWp 18.0 kWp
Max. PV input voltage 1100 V
*
Min. PV input voltage /
Start-up input voltage
180 V / 180 V
Nominal input voltage 600 V
MPP voltage range 160 V–1000 V
MPP voltage range for
rated power
320 V – 850V
**
400V – 850V
**
No. of independent MPP
inputs
2
No. of PV strings per MPPT
2 / 1
Max. PV input current 48 A (32 A / 16 A)
Max. DC short-circuit
current
60 A (40 A / 20 A)
10 Appendix User Manual
To Next Page
Loading...
