To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG3400HV-20 and is the answer not in the manual?
Manual's intended product scope.
Overview of manual's information.
Identifies the intended audience for the manual.
Explains safety and operational symbols used in the manual.
Guidance on manual navigation and usage.
Defines key terms and abbreviations used.
Describes the product's application and intended use.
General safety guidelines and critical precautions.
Overview of the inverter's external structure.
Details of the inverter's internal layout.
Lists items included in the inverter package.
How to identify the inverter using its nameplate.
Procedures for inspecting the inverter for shipping damage.
Guidelines for proper storage before installation.
Instructions for safely transporting the inverter.
Procedures for lifting and moving the inverter.
Requirements and steps for preparing the foundation.
Specifies necessary space around the inverter.
Instructions for removing protective tapes.
Critical safety rules for electrical installation.
Steps and tools needed before wiring.
Explains wiring diagrams and connections.
Procedures for connecting DC power.
Procedures for connecting AC power.
Instructions for grounding the system.
How to connect communication cables.
Connecting external power sources.
Final checks and sealing after wiring.
Diagram of system connection points.
Steps to safely disconnect system components.
Steps to safely reconnect system components.
Critical safety guidelines for commissioning.
Prerequisites and conditions for commissioning.
Pre-commissioning checks and verifications.
Final checks before device startup.
Step-by-step guide to starting the inverter.
Setting parameters via the LCD.
Final checks after commissioning.
Procedures for starting the inverter.
Procedures for stopping the inverter.
Overview of the touchscreen interface.
Explanation of the initial display screen.
General structure of the LCD menu.
Process for accessing protected settings.
How to change the display language.
How to configure date and time settings.
Viewing real-time operational data.
Accessing historical operational data.
Viewing current fault status.
Operating the inverter's start/stop functions via LCD.
Restoring factory default settings.
Viewing the software version.
Detailed list of LCD settable parameters.
Describes the different operating states of the inverter.
How to limit the inverter's active power output.
How to adjust and control reactive power output.
Inverter behavior during low voltage events.
Inverter behavior during high voltage events.
How temperature affects inverter output.
Explanation of Maximum Power Point Tracking.
Inverter's fan speed control based on temperature.
Function for monitoring insulation resistance.
Overview of the inverter's protection features.
Critical safety guidelines for troubleshooting.
Initial checks before contacting support.
Identifying and resolving inverter faults.
Critical safety guidelines for maintenance.
General procedures and intervals for maintenance.
Procedures for cleaning the inverter.
Procedures for cosmetic repair of the inverter's exterior.
Steps for replacing internal electrical parts.
Technical specifications of the inverter.
Recommended torque values for connections.
Legal disclaimer and limitations of responsibility.
Details for contacting Sungrow for support.
General