Need help?Do you have a question about the Sungrow SG8.0RS-L and is the answer not in the manual?
General| Rated Output Power | 8000 W |
|---|---|
| Maximum DC Input Voltage | 1000 V |
| MPPT Voltage Range | 160-850 V |
| Number of MPPTs | 2 |
| Efficiency | 98.4% |
| Weight | 18 kg |
| Cooling Type | Natural convection |
| Protection Class | IP65 |
| Start Voltage | 200 V |
| Number of DC Connections per MPPT | 2 |
| Rated AC Output Power | 8000 W |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| AC Frequency Range | 45 Hz - 55 Hz / 55 Hz - 65 Hz |
| THDi | < 3% |
| DC Switch | Yes |
| Operating Temperature Range | -25 °C to +60 °C |
| Cooling Method | Natural convection |
| Protection Degree | IP65 |
| Max. DC Input Power | 12000 W |
| Max. AC Apparent Power | 8000 VA |
| Rated AC Voltage | 230 V |
| Adjustable Power Factor | 0.8 leading ... 0.8 lagging |
Specifies the models for which the manual is applicable.
Identifies the intended audience for the manual, typically professional technicians.
Provides guidance on how to read and use the manual effectively.
Indicates high-risk hazards potentially causing death or serious injury.
Indicates moderate-risk hazards potentially causing death or serious injury.
Indicates low-risk hazards potentially causing minor or moderate injury.
Indicates risks leading to device malfunctions or financial losses.
General guidelines for safe installation, operation, and maintenance of the product.
Procedures for checking the product upon receipt for damage and completeness.
Safety precautions to be taken during the installation process.
Safety guidelines for connecting the inverter to electrical systems.
Safety measures during the normal operation of the inverter.
Safety precautions to be observed during maintenance procedures.
Guidelines for the safe and environmentally responsible disposal of the inverter.
Overview of the inverter's role and function within a PV power system.
Details about the inverter's model naming convention and visual appearance.
Visual representation and physical measurements of the inverter.
Explanation of symbols found on the inverter itself.
Description of the LED panel's display and indicators for inverter status.
Schematic representation of the inverter's main internal circuit.
Explanation of the inverter's basic and protective functions.
Details on specific operational functions like DRM, feed-in limitation, and PID Zero.
Procedures for checking the product upon receipt for damage and completeness.
Recommendations for storing the inverter when not in immediate use.
Safety precautions to be followed during the physical installation of the inverter.
Criteria for selecting an appropriate installation site for optimal performance and safety.
Specifies the correct orientation and necessary space around the inverter for installation.
Lists the tools recommended for the installation process.
Instructions for safely handling and transporting the inverter.
Step-by-step guide for mounting the inverter on the wall.
Critical safety guidelines for making electrical connections to the inverter.
Best practices and notices for ensuring proper and safe electrical connections.
Identification and purpose of the various terminals on the inverter.
Details on cable specifications and an overview of the electrical connection process.
Instructions for establishing a reliable protective earth connection.
Step-by-step guide for performing the protective grounding connection.
Specifications and requirements for connecting the AC power cable.
Step-by-step guide for connecting the AC power cable to the inverter.
Safety and procedural information for connecting DC cables from PV strings.
Important safety warnings and notices for DC cable connections.
Details on configuring the inverter's PV input channels.
Instructions for assembling the connectors for DC cables.
Steps for connecting the assembled PV connectors to the inverter.
Instructions for installing the WiFi-P2 communication module.
Checklist of items to verify before starting the commissioning process.
Steps to safely power on the inverter and system for the first time.
Steps for preparing the mobile application for system setup.
Guide to setting up a new plant profile within the iSolarCloud App.
Entering specific details like tariffs and owner information for the plant.
Completing the setup by binding the device and confirming commissioning.
Overview of the iSolarCloud App's capabilities for monitoring and maintenance.
Instructions for downloading and installing the mobile application.
Process for creating user accounts for the iSolarCloud App.
Steps for logging into the application with registered credentials.
Connecting via WLAN and performing initial device setup.
Configuring country/region and network service provider settings.
Detailed table of network service providers and their associated grid types.
Setting system parameters like grid type and reactive power mode.
Filling in essential details required for plant configuration in the app.
Overview of the app's functional modules and navigation structure.
Description of the main home screen and its elements.
Viewing operational data like inverter state, energy flow, and power.
Accessing and viewing event logs and fault alarms.
Accessing advanced settings like system parameters, operation parameters, etc.
Settings related to system boot/shutdown, date, time, and software version.
Settings for running time and PID parameters.
Configuration options for active and reactive power regulation.
Steps to safely disconnect the inverter from power sources.
Procedures for physically removing the inverter from its installation.
Guidelines for the proper and compliant disposal of the inverter.
Identifying and resolving common faults and errors with corrective measures.
Troubleshooting common issues related to grid voltage, frequency, and power.
Diagnosing and fixing faults related to PV string connections and voltage imbalances.
Addressing issues related to high/low ambient temperatures and PV alarms.
Troubleshooting insulation resistance, grounding, and communication issues.
Resolving general system faults, alarms, and MPPT connection issues.
Troubleshooting faults related to boost capacitors and string current reflux.
Addressing PV grounding faults and system hardware issues.
Safety precautions and important notices before performing maintenance.
Schedule and methods for regular maintenance tasks like cleaning and checks.
Detailed technical specifications for DC and AC parameters of the inverter.
Technical specifications related to inverter efficiency and protection features.
General data including dimensions, weight, and communication interfaces.
Information regarding warranty terms, conditions, and exclusions.
How to contact Sungrow for support or inquiries.
To Next Page
