To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG50CX and is the answer not in the manual?
General| Max. DC Voltage | 1100 V |
|---|---|
| MPPT Voltage Range | 200 V - 1000 V |
| Max. Input Current per MPPT | 26 A |
| Number of MPPTs | 4 |
| Rated AC Output Power | 50 kW |
| Max. AC Output Current | 76 A |
| Frequency | 50 Hz / 60 Hz |
| Efficiency | 98.6% |
| Start Voltage | 200 V |
| Number of DC Inputs per MPPT | 2 |
| Max. AC Apparent Power | 55 kVA |
| AC Voltage Range | 310 V - 480 V |
| Power Factor at Rated Power | 1 |
| Adjustable Power Factor Range | 0.8 leading - 0.8 lagging |
| THDi | < 3% |
| DC Switch | Yes |
| AC Surge Protection | Type II |
| DC Surge Protection | Type II |
| Protection Class | I |
| Cooling Method | Smart forced air cooling |
| Protection Degree | IP66 |
| Protection Level | IP66 |
| Operating Temperature Range | -25°C to +60°C |
| Humidity | 0-100% |
| AC Output Voltage | 3 / N / PE, 220 V / 380 V, 230 V / 400 V |
Outlines critical safety precautions to follow during the physical installation process.
Emphasizes safety measures for electrical connections, including handling high voltages.
Covers safety guidelines for operating the inverter, including cable routing and avoiding hot parts.
Highlights safety precautions and warnings to be observed during the mounting process.
Crucial safety warnings for electrical connections, emphasizing high voltage and proper procedures.
Details the requirements and procedure for establishing a reliable external protective ground connection.
Provides step-by-step instructions for starting up the inverter and connecting it to the grid.
Lists common fault codes, names, and corrective measures for inverter issues.
