To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG5.0RT-P2 and is the answer not in the manual?
General| Model | SG5.0RT-P2 |
|---|---|
| Rated Output Power | 5.0 kW |
| Nominal DC Voltage | 600 V |
| Max. DC Input Voltage | 1100 V |
| Number of MPPT | 2 |
| Max. AC Apparent Power | 5.5 kVA |
| Power Factor at Rated Power | > 0.99 |
| THDi | < 3% |
| DC Injection Current | < 0.5% In |
| Max. Efficiency | 98.4% |
| Protection Degree | IP65 |
| Max. AC Output Power | 5.5 kW |
| Input Voltage Range | 200-1000 V |
| Nominal AC Voltage | 230 V |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| AC Frequency Range | 45-55 Hz / 55-65 Hz |
| Power Factor | 0.8 leading - 0.8 lagging |
| Operating Temperature Range | -25 °C ~ +60 °C |
| Humidity Range | 0 - 100 % |
| Altitude | 4000 m |
| Communication | Ethernet (optional) |
Specifies the models of low-power grid-connected PV string inverters for which this manual is applicable.
Identifies intended users, including professional technicians and users needing to check inverter parameters.
Guides on checking the product for damage and verifying the packing list upon receipt.
Outlines critical safety precautions to be taken before and during the installation process.
Details safety measures for electrical connections, highlighting high voltage hazards and PPE requirements.
Covers essential safety guidelines to follow while the product is in operation to prevent injury.
Provides crucial safety instructions for performing maintenance tasks, emphasizing power disconnection and protection.
Advises on proper product disposal in accordance with local regulations to avoid environmental impact.
Explains the inverter's role as a transformerless 3-phase PV grid-connected inverter in a PV system.
Introduces the product's model description and appearance, noting that images are for reference.
Explains various symbols used on the product for compliance, warnings, and maintenance information.
Describes the meaning of different LED colors and states indicating the inverter's working status.
Presents the main circuit diagram of the inverter, illustrating its components and connections.
Details the basic functions, communication interfaces, and protective functions integrated within the inverter.
Details the process of inspecting the product after receiving it to check for any damage or missing parts.
Provides guidelines for proper storage of the inverter when it is not immediately installed, including temperature and humidity.
Emphasizes safety precautions during the mechanical installation of the inverter, including handling and environment.
Specifies optimal location requirements for the inverter, considering environmental conditions and accessibility.
Lists recommended tools required for the installation process, including safety gear and specialized tools.
Provides instructions and warnings for safely moving the inverter from its packaging to the installation site.
Details the procedure for mounting the inverter onto a wall using a wall-mounting bracket and expansion plug sets.
Covers essential safety instructions for electrical connections, including high voltage and proper grounding.
Identifies and describes the various terminals located on the bottom of the inverter for input and communication.
Shows the overall electrical connection diagrams for different inverter models (e.g., SG5.0-20RT and SG5.0-20RT-P2).
Explains the procedure and requirements for establishing a reliable external protective grounding connection.
Details the process of assembling and installing AC connectors for connecting the inverter to the grid.
Provides instructions for connecting DC cables, including PV input configuration and connector assembly.
Guides on connecting WiNet-S/WiNet-S2 modules for Ethernet and WLAN communication.
Specific instructions for establishing a WiFi connection for the inverter in Brazil.
Details the connection procedure for a Smart Energy Meter to monitor feed-in power.
Explains how to establish RS485 communication for connecting devices or multiple inverters in a daisy chain.
Describes the DO relay connection for an earth fault alarm, including wiring to indicators or buzzers.
Outlines how to connect to a Demand Response Enabling Device (DRED) for demand response modes.
Explains the connection for a Ripple Control Receiver to receive grid dispatching signals.
Details the NS Protection terminal usage for emergency stop functionality, especially for the German market.
Lists checks to be performed before starting the inverter for the first time to ensure proper installation.
Step-by-step guide on how to safely power on the inverter and the entire system.
Instructions for arranging and documenting the physical layout of optimizers if they are installed with PV modules.
Steps for preparing the iSolarCloud App, including installation, account registration, and firmware download.
Guide on creating a new plant within the iSolarCloud App, including setting up plant details and binding devices.
Introduces the iSolarCloud App for remote monitoring, data logging, and maintenance of inverters.
Provides methods for downloading and installing the iSolarCloud App on mobile devices.
Guides users through the process of registering either an end-user or distributor/installer account.
Details the requirements and procedures for logging into the iSolarCloud App, including WLAN and manual connection.
Explains how to perform initial settings, particularly Country/Region, to ensure correct inverter operation.
Provides an overview of the App's parameter viewing and setting functionalities.
Describes the main elements and information displayed on the iSolarCloud App's home screen.
Explains how to access and interpret running information, including PV status, inverter details, and grid data.
Guides on accessing event records, fault alarm records, and chart data within the App.
Covers additional functionalities available under the 'More' menu, such as parameter settings and firmware updates.
Provides steps to safely disconnect the inverter from AC and DC power sources, including waiting for discharge.
Details the procedure for safely dismantling the inverter after it has been powered off and discharged.
Advises users on their responsibility for proper disposal of the inverter according to electronic waste regulations.
Provides a table of fault codes, names, and corrective measures for common inverter issues.
Outlines general maintenance notices and procedures, including safety precautions for servicing the inverter.
Presents detailed technical specifications for various inverter models, including input, output, and general data.
Explains Sungrow's warranty policy, service provisions, and conditions for quality assurance.
Provides contact details and information required for customer support and inquiries about the product.
