___________________________________________________________________________________
33
RS-485 ACS™ Technology (Default: Enable)
Auto Carrier Sense (ACS™) technology is the data flow control under RS-485
half duplex (one-way traffic) communicating. It manages data flow between
computers or devices or between nodes in a RS-485 network, so that the data
can be handled at an efficient pace
Auto Carrier Sense (ACS™) technology will check the status of RS-485
communication bus. If the bus is idle, it starts transmission. If the bus is not idle
(some data flows in the bus), then it will postpone the transmission of UART until
the bus is idle. Due to the reduction of TX/RX packet conflicting on RS-485
one-way traffic bus, it will enhance better system performance and RS-485
communication ability.
To Next Page
Loading...