Sunmi V2 SE - Page 3

No.3Pages total10Page
Display
5.0"HD 1280*720
(5.0"FW+ 960*480 optional)
5.0"HD 1280*720
(5.0"FW+ 960*480 optional)
touchscreen
Capacitive multi-touch
Capacitive multi-touch
printer
Built-in high-speed thermal printer
Printing speed 80mm/s
Support width is 58mm
Paper roll with outer diameter 50mm
Built-in high-speed thermal printer
Printing speed 80mm/s
Support width is 58mm
Paper roll with outer diameter 50mm
Camera
Rear: 0.3MP FF + flash,
Supports one-dimensional/two-
dimensional code recognition (2M/5M
optional)
Rear: 0.3MP FF + flash,
Supports one-dimensional/two-
dimensional code recognition (2M/5M
optional)
PSAM card slot
1*Nano SIM
1*SIM
1*Nano SIM
1*SIM
Network Type
Support 2G&3G&4G network
Support 2G&3G&4G network
WIFI
2.4G/5G
IEEE 802.11a/b/g/n/ac
2.4G/5G
IEEE 802.11a/b/g/n/ac
Bluetooth
Support bluetooth
2.1/3.0/4.2 supports BLE
Support bluetooth
2.1/3.0/4.2 supports BLE
GPS
Support AGPS
Support GPS/Glonass/Beidou
Support AGPS
Support GPS/Glonass/Beidou
trumpet
95dB
95dB
button
1* Power button (lock screen button)
2* Volume keys (plus/minus)
1* Power button (lock screen button)
2* Volume keys (plus/minus)
Battery
Removable lithium battery 7.2V
2600mAh (18650 cells)
Removable lithium battery 7.2V
2600mAh (18650 cells)
NFC
not support
not support
interface
1*Type-C
Support OTG
1*Micro-SD
1*Type-C
Support OTG
1*Micro-SD
POGO PIN 6PIN
Power Adapter
Input: AC 100-240V
Output: DC 5V/1A
Input: AC 100-240V
Output: DC 5V/2A
Base
/
Support base charging
Dimensions (length x width x
thickness)
209.5*80*29mm
209.5*80*29mm
weight
400g
400g
Usage environment
Working temperature: -10~50℃
Storage temperature: -20~60℃
Working temperature: -10~50℃
Storage temperature: -20~60℃
Protection level
1.2m drop test
1.2m drop test