Safety
vi 975-0294-01-01
5. Use only accessories recommended or sold by the
manufacturer. Doing otherwise may result in a risk of
fire, electric shock, or injury to persons.
Explosive Gas Precautions
WARNING: Shock hazard
Before opening the SunPower Solar Inverter wiring/disconnect
box, turn OFF the breaker switches connected to the inverter AC
output, and turn the DC/AC Disconnect switch to the OFF position.
Hazardous voltage will still be present on the DC input (PV)
terminals located under the clear plastic insulation barrier. Do not
remove the insulation barrier.
WARNING: Explosion hazard
This equipment is not ignition protected. To prevent fire or
explosion, do not install the monitor in compartments containing
flammable materials or in locations that require ignition-protected
equipment. This includes any space containing gasoline-powered
machinery, fuel tanks, as well as joints, fittings, or other
connections between components of the fuel system.
SunPower-Wired-Remote.book Page vi Friday, July 7, 2006 5:09 PM
To Next Page
Loading...
