Sunrain YC-050TA1 - Accessories Description; Attention for Safety

- 4 -
1. Accessories Description
Each unit produced by our factory with the following accessories:
For function you need to purchase at least the following parts for each unit:
No.
Name
Qty.
use
1
Water circulation pump
Drive the water cycle
2
Swimming pool filter system
Protect the heat pump heat exchanger and pipes
3
Water pipe and valves
Connect the equipment and make circulation
NOTE
The types and quantity of the water pump, filters, pipes and water tank, refer to the real project design.
We do not suggest to install auxiliary electric heaters in the system, if must install auxiliary electric
heaters, should install the electric heaters by the specialized persons, and our company has no
responsibility for all the problem cause by the auxiliary electric heater.
2. Attention for safety
Range of application:
1.Power supply: 380V/3N~50Hz.
2.Environment temperature: -7°C〜43°C ：
3.Working water temperature: Min. inlet water temperature 8°C, Max. outlet water
temperature 40°C. If the system is always used beyond the available water range,
please contact with the local agent.
● The installation shall be done by the professional persons, to prevent leaking, electric shock, or fire
disaster.
● Confirm the ground connection, if the ground connection is not correctly done, it may cause electric
shock.
No.
Name
Qty.
Use
1
Installation & Operation Manual
1 PC
Guide users to install the system
2
Wire controller
1 PC
Used for the man-machine operation interface
3
Wire controller connecting cable
1 PC
Connect wired controller to heat pump unit
4
Heat pump unit
1 SET
For heating water