3
Slot
Figure 13
Figure 12
Figures 7 & 8
Figure 12
WARNING: A HELPER MUST SUPPORT THE LATERAL
ARM WHILE IT IS BEING INSTALLED. FAILURE TO DO
SO COULD CAUSE PERSONAL INJURY AND DAMAGE
TO THE PRODUCT.
Figure 10
Figure 14
Figure 10
Figure 10
See Figure 9.
Smaller, shorter
RIGHT side
only
Figure 11
Note: Insert the Allen Cap Bolt
from underneath the Lateral Arm.
opening on the top side of the
Lateral Arm. See Figure 10.
Note
Clamp and Lateral Arm Assembly
Figure 9
Steps 8 through 22
See Figure 12
Note: Both Lateral Arms, Arm Clamps, and Front Bar
WARNING: BEFORE REMOVING THE PLASTIC SAFETY
SLEEVES, MAKE SURE NO LADDER, PERSON OR
OBJECT IS IN FRONT OF THE AWNING. FAILURE TO
DO SO COULD RESULT IN PERSONAL INJURY.
WARNING: DO NOT CUT THE SAFETY SLEEVES.
FAILURE TO DO SO COULD RESULT IN PERSONAL
INJURY.
Note
remove
To Next Page
Loading...
